UVW Stage

SYSTEM: IDLE
Sync: Web UI
Bridge Offline
🌐
Download PC Bridge (v2.1.4)
VIEW
ZOOM
STAGE
Stage (XYθ)
X:0.000mm
Y:0.000mm
θ:0.0000deg
Motors (UVW)
U:0.000mm
V:0.000mm
W:0.000mm
2D Schematic
Table UVW Vectors Limit Ring
Message
📐 Engineering Reference & Kinematics

UVW Alignment Stage: Architecture & Kinematics Specification

A comprehensive technical guide to 3-axis planar alignment (XXY/UVW kinematics), coordinate transformations, 2-point vision mark calibration algorithms, and industrial PLC motion integration.

🚀 Prerequisite Step 1: Download & Launch GoGG PC Hardware Bridge

To synchronize this 3D digital twin with physical Mitsubishi MELSEC PLCs, C# automation controllers, or local kinematic hardware in real time, you must download the GoGG PC Hardware Bridge and run it on your PC. Standard web browsers block direct raw socket communication to factory LANs for security reasons; the local Bridge agent (Bridge.exe) establishes a high-performance local WebSocket gateway (127.0.0.1:8765) that seamlessly bridges motion coordinates (U, V, W, X, Y, θ) between this 3D simulator and physical hardware.

📥 Download Bridge (.zip) v2.1.4 Extract the archive and run Bridge.exe.
⚠️ Important Notice: Intended Use & Commercial Disclaimer

Personal Development & Testing Purpose Only: The GoGG UVW Stage 3D Digital Twin and local PC Hardware Bridge (Bridge.exe) are developed strictly for individual kinematics research, educational learning, algorithm simulation, and offline laboratory testing. They are NOT certified or rated for commercial production machinery, high-speed industrial manufacturing lines, or safety-critical automation systems. Any use in commercial production facilities is undertaken solely at the user's personal discretion and risk. GoGG and its developers disclaim any and all liability or responsibility for equipment damage, stage collisions, operational downtime, or consequential damages resulting from the use of this software.

⚙️ 1. What is a UVW Stage?

Overview

A UVW Stage (commonly referred to as an XXY Alignment Stage or 3-Axis Planar Stage) is a high-precision positioning mechanism designed to produce fine 3-degree-of-freedom motion (X translation, Y translation, and θ rotation) on a single horizontal plane.

Why UVW instead of stacked X-Y-θ stages?

  • Coplanar Drive Architecture: All three linear actuators (U, V, W) lie on the exact same base plane, eliminating stacked cantilever loads.
  • Zero Cumulative Abbe Errors: Minimizes mechanical flexure and geometric stack-up errors inherent to vertical stage towers.
  • Low Profile & High Rigidity: Extremely compact height allows easy integration under high-magnification microscope objectives and vision cameras.

Primary Industrial Applications: Semiconductor wafer probing, FPD & OLED panel bonding/lamination, SMT stencil screen printing, micro-LED die transfer, and Automated Optical Inspection (AOI).

🎮 2. 3D Stage Controls & Camera Views

Controls

The interactive 3D viewport lets you inspect how the three coplanar actuators move the upper table across the X, Y, and θ axes in real time:

  • Camera Presets: Switch between Isometric 3D, Top-Down Planar View, and Side Views, or use your mouse to orbit (Left-Drag), pan (Right-Drag), and zoom (Scroll Wheel).
  • X / Y / θ Posture Control: Drag the target X, Y, and θ sliders or enter numeric values in the control panel to command a stage posture shift and observe the corresponding actuator motion.
  • Individual Motor Jogging: Switch to direct motor mode to jog the U, V, and W actuators independently and observe the resulting table translation and rotation.
  • High-Magnification Mode: Enable visual exaggeration to clearly observe micrometer-scale alignment shifts on the 3D model.

📷 3. Vision Mark Alignment Workflow

Vision Alignment

In semiconductor wafer bonding, display lamination, and PCB screen printing, dual machine vision cameras inspect two fiducial marks (Mark 1 and Mark 2) on the substrate to align the part before processing:

  • Simulate Misalignment: Introduce a random or manual placement offset on the substrate to simulate an incoming part with X, Y, and angular skew errors.
  • Dual Camera Inspection: Observe the live Left and Right vision camera viewports displaying the current mark crosshairs relative to the target reference marks.
  • One-Click Auto Alignment: Click the Auto-Align button to automatically align the substrate marks with the target crosshairs and verify the final residual alignment accuracy.

📐 4. Stage Geometry & Pivot Settings

Configuration

Different equipment platforms arrange their three linear actuators in varying layouts. Using the Geometry configuration panel, engineers can customize:

  • Actuator Span & Offsets: Adjust the physical spacing between actuators to match your machine design envelope.
  • Center of Rotation: Shift the target pivot point to test how rotating around the table center versus an off-center fiducial mark affects actuator travel ranges.
  • Stroke Limit Warnings: Immediately see if a requested X, Y, and θ target exceeds the mechanical travel limits of any actuator.

🔌 5. Live PLC Digital Twin Link

PLC Integration

Using the PLC Link tab and the local GoGG PC Hardware Bridge (Bridge.exe), engineers can link this 3D UVW stage directly to a physical PLC or local simulator. Moving sliders in the web UI updates the linked registers, and ladder logic changes on the PLC move the 3D stage in real time—making it easy to verify alignment sequences before running on hardware. For kinematics equations and two-point fiducial math, see UVW Alignment Stage Forward & Inverse Kinematics.

💬 Technical Discussion & Feedback

Community

Have questions about UVW stage kinematics formulas, calibration accuracy, or PLC communication? Leave your thoughts, questions, or feature requests below!

Legal & Usage Disclaimer: GoGG UVW Stage Simulator and the local PC Hardware Bridge (Bridge.exe) are strictly designed for personal development, academic research, simulation, and offline laboratory testing. They are not certified for commercial manufacturing equipment, industrial production lines, or life-critical machinery. Any commercial use is at the user's sole risk, and the authors disclaim all liability for any equipment damage, production downtime, or consequential losses.