Mitsubishi MELSEC SLMP & MC Protocol 3E Engineering Guide
Before connecting to a physical MELSEC PLC or running the internal PLC communication simulator, you must download the GoGG PC Hardware Bridge and launch it on your local PC. Because standard web browsers enforce security sandboxes preventing direct raw TCP/IP socket connections to industrial automation hardware, the local Bridge agent (Bridge.exe) establishes a high-performance local gateway on your computer (127.0.0.1:8765) that relays commands to your PLC equipment or local simulation engine without burdening any remote servers.
Personal Development & Testing Purpose Only: The GoGG PC Hardware Bridge (Bridge.exe) and browser-based PLC communication suites are designed and provided strictly for individual engineering development, educational research, offline simulation, and laboratory testing purposes. They are NOT certified or rated for commercial production environments, automated factory lines, high-risk manufacturing operations, or life-safety machinery. Any application in commercial facilities or live manufacturing systems is conducted solely at the user's own discretion and risk. GoGG and its developers assume zero responsibility or legal liability for any equipment damage, production downtime, operational interruption, financial losses, or adverse consequences resulting from the use or misuse of this software.
Melsec Monitor is a browser-based PLC diagnostics, device watch, and interactive web HMI studio designed for Mitsubishi Electric MELSEC programmable logic controllers, including the iQ-R Series, iQ-F (FX5U) Series, Q Series, and L Series. Engineers can connect to physical PLC hardware over Ethernet or test ladder logic against local PLC simulations directly from the browser workspace.
1. Quick Start & Connection Workflow
Setting up a live monitoring session takes less than a minute using the Connection tab:
- Launch the Local Bridge: Download and run
Bridge.exeon your Windows PC. The header indicator will switch to Bridge Connected as soon as the local helper is active. - Select Target Mode: Choose between a physical Ethernet PLC connection (entering your PLC IP address and communication port) or local simulator mode for offline ladder testing.
- Connect & Verify: Click Connect to begin polling. The live frame rate badge in the top header confirms active communication and response timing.
2. Supported PLC Device Families & Data Formats
The Device Monitor tab supports standard Mitsubishi Electric bit relays and word registers alongside project global labels and structured tags:
- Bit Devices: Input relays (
X), output relays (Y), internal auxiliary relays (M), latch relays (L), link relays (B), annunciator fault bits (F), and special relays (SM). Word bit dot notation is also supported for inspecting individual bits inside word registers. - Word & File Registers: Data registers (
D), link registers (W), file registers (R,ZR), special registers (SD,SW), and index registers. - Timers & Counters: Supports standard timers (
T), retentive timers (ST), counters (C), and long timers/counters, allowing engineers to observe contact states, coil states, and current accumulated values. - Display & Edit Formats: View and modify values as 16-bit Signed/Unsigned integers, 32-bit Double Words, single/double-precision floating-point numbers, hexadecimal bit strings, BCD values, or ASCII/Unicode text strings.
3. Multi-Sheet Watchlists, Inline Editing & Autocomplete
During equipment commissioning and sequence debugging, engineers often track dozens of signals across multiple machine stations:
- Rapid Keyboard Entry & Autocomplete: Type a physical device address or a loaded project tag name in the input bar and press Enter to add it immediately. When a project file or label CSV is loaded, an interactive autocomplete menu suggests matching tag names, data types, and descriptions as you type.
- Batch Address Generation: Use the Interval and Count fields to register consecutive blocks of devices or array elements in a single step.
- Inline Value Writing & Descriptions: Click any live value cell in the watch table to type a new value and send it to the PLC, or double-click the description column to record commissioning notes. Rows can be reordered at any time using the drag handle on the left.
- Multiple Watch Sheets: Create separate tabs at the bottom of the monitor table (such as
Watch,Servo_Axes,Safety_IO, orAlarms) to keep large automation projects organized. Double-click any sheet tab to rename it.
4. Interactive Web HMI Touch Panel Builder
The HMI tab lets you build custom operator control panels directly in the browser without installing external screen design software:
- Push Buttons & Word Switches: Configure momentary pulse buttons, press-and-hold jog buttons, toggle switches, set/reset buttons, or preset word switches that write a specific constant value (such as a mode number or recipe index) to a target register.
- Pilot Lamps & Condition Comparison Lamps: Place multi-color status lamps bound to bit addresses, or configure comparison lamps that illuminate when a word register matches a target value or falls within a specified numeric range.
- Numeric Displays, Inputs, Sliders & Bar Gauges: Monitor live process variables, motor speeds, and tank levels with digital readouts and proportional bar gauges, or double-click a display in Run Mode to enter a new setpoint.
- Edit vs. Run Mode: Switch to Edit Mode to drag, resize, copy/paste (
Ctrl+C/Ctrl+Vacross pages), and auto-arrange widgets on the grid, then lock the canvas in Run Mode for safe operator testing.
5. Project Label Management & CSV Export / Merge Utilities
Working with symbolic tags and structured variables is streamlined through built-in client-side project tools:
- Local Project & Label Loading: Drop a project file or label CSV sheets into the workspace to browse global labels, structures, and comments locally in your browser without uploading sensitive project files to any external server.
- One-Click Label Export & Multi-CSV Merge: Export discovered project labels into organized CSV spreadsheets for documentation or SCADA/HMI import, or drop multiple Global Label CSV files together to combine them into a single unified table.
- Backup Folder Inspector: Open a project backup folder in the Backup Analysis tab to cross-reference global and module labels with their assigned I/O addresses and send selected tags directly to the Device Monitor or HMI canvas.
6. AI Agent & Model Context Protocol (MCP) Integration
The GoGG PC Hardware Bridge (Bridge.exe) includes a local Model Context Protocol (MCP) interface supporting both local HTTP (http://127.0.0.1:8765/mcp) and standard input/output (Bridge.exe --mcp) connections. Desktop AI coding and engineering assistants—such as Claude Desktop, Cursor, Google Antigravity, and VS Code—can assist engineers by connecting to simulation sessions, organizing watchlists, and reading or writing test registers through natural language commands.
7. Frequently Asked Questions (FAQ)
Q: Can I test my PLC program using only a simulator on my PC?
A: Yes. Start your PLC simulation in your engineering software, launch Bridge.exe, select the corresponding simulator option in the Connection tab, and click Connect to monitor and toggle devices in real time.
Q: Why can I read PLC values, but writing a value is rejected?
A: If online changes or external device write permissions are disabled in the PLC\'s communication parameters, the CPU operates in read-only mode for external tools. Enable external write access in your PLC Ethernet port configuration and update the PLC parameters to allow two-way writes.
Q: Are my loaded PLC project files or tag lists shared online?
A: Never. All file inspection, tag autocomplete, and CSV exports run entirely inside your local browser session. No project files or tag names are uploaded to any server.